android
eSIM compatibility check

November 9, 2026

Xiaomi eSIM for travel 2026: HyperOS setup guide

Xiaomi eSIM for travel: the exact HyperOS 3 menus to add a travel eSIM, keep your number on the home SIM, set roaming and fix the usual errors.

A backpack and a passport on a wooden table, ready for a trip

Photo: Porapak Apichodilok — Pexels

To add a travel eSIM on a Xiaomi, Redmi or POCO phone running HyperOS 3, open Settings › Mobile networks, switch on Turn on eSIM, confirm with OK, tap Add eSIM and scan the QR code from your eSIM provider, as Xiaomi's own eSIM help page describes. Do it at home on Wi-Fi, a day or two before you fly. On arrival you only change three settings: the eSIM becomes the Data SIM, data roaming is allowed, and your home SIM keeps calls and texts.

This guide covers HyperOS 3 on Android 16, the version on most eSIM-capable Xiaomi phones on 9 November 2026, and says what changes on older layouts and with HyperOS 4, which Xiaomi started rolling out in early November. It does not repeat our model list or the generic Android steps: it links them. The worked example at the end uses a Morocco eSIM; our Morocco eSIM guide has everything else about connecting there.

Key takeaways

  • Only some Xiaomi phones have eSIM: Xiaomi's official eSIM page listed 32 devices on 9 November 2026, mostly Xiaomi T and number series, Redmi Note Pro models and a few POCO F and X phones. Chinese versions have no eSIM.
  • The HyperOS 3 path is Settings › Mobile networks › Turn on eSIM › OK › Add eSIM. Older software shows SIM cards & mobile networks › Use eSIM › Manage eSIM › Add mobile plan instead.
  • Install at home, then on landing set the eSIM as Data SIM, allow data roaming for it, and keep Default for calls on your home SIM so bank codes and calls still reach your number.

Which Xiaomi, Redmi and POCO phones have eSIM?

On 9 November 2026, Xiaomi's official eSIM page named 32 devices: Xiaomi flagships from the 12T Pro onwards, the Redmi Note Pro, Pro+ and Pro Max models from the Note 13 series, the POCO F8, F9 and X8s, one tablet and one watch. Every other Redmi and POCO, including the plain Redmi Note and the Redmi number series, has no eSIM in its global version. Our complete Xiaomi and Redmi model list gives the regional exceptions model by model, so we only summarise here.

FamilyOn Xiaomi's eSIM list (9 Nov 2026)Check before you buy a plan
Xiaomi12T Pro, 13, 13 Pro, 13 Lite, 13T, 13T Pro, 14, 14T, 14T Pro, 15, 15 Ultra, 15T, 15T Pro, 17, 17 Ultra, 17T, 17T ProChinese versions: no eSIM
RedmiNote 13 Pro 5G, Note 13 Pro+ 5G, Note 14 Pro 5G, Note 14 Pro+ 5G, Note 15 Pro 5G, Note 15 Pro+ 5G, Note 17 Pro 5G, Note 17 Pro Max, Pad 2 Pro 5GSome Indian and Japanese versions differ
POCOF8 Pro, F8 Ultra, F9 Pro, F9 Ultra, X8sOther POCO models: no eSIM

The source is the list behind Xiaomi's page Carriers which support eSIM on your Xiaomi smartphone/smartwatch, which warns that availability "may vary depending on country/region and carrier". The Chinese versions are the classic trap: Notebookcheck's Xiaomi 17 review notes that the Chinese Xiaomi 17 has no eSIM, while the global one does. If you are not sure which version you hold, look for an EID in the phone's status information, as our guide to finding the EID on Android explains. POCO owners will find the details in our POCO and Redmi eSIM check, and the device pages for Redmi and POCO track new models.

Before you start: HyperOS version, Wi-Fi and the QR code

Three minutes of checks prevent most failed installs. The menu names below are Xiaomi's for HyperOS 3, documented on Xiaomi's 14T and Xiaomi 15 help pages and in Vodafone Ireland's step-by-step guides for the Xiaomi 17 on Android 16. Notebookcheck confirms that the Xiaomi 17 ships with HyperOS 3 on Android 16.

  1. Check your version. The phone's information screen in Settings shows which HyperOS version it runs. On HyperOS 3 the SIM screen is called Mobile networks; if you see SIM cards & mobile networks, you are on an older layout (see the table in the next section).
  2. Connect to Wi-Fi. The phone downloads the eSIM profile from the provider's server, so it needs a stable connection, ideally your home Wi-Fi.
  3. Keep the QR code on another screen. You will scan it with the phone itself, so open the email on a laptop or print it. Keep the manual details (SM-DP+ address and activation code) as a backup.
  4. Charge the phone and do not start a system update during the install.

HyperOS 4, based on Android 17, began reaching global phones in early November 2026: Xiaomi's HyperOS page lists the Xiaomi 17 series, Redmi Note 15 Pro series and POCO F8 series first, the Xiaomi 15 series, Redmi Note 17 Pro series and POCO F9 series from mid-November, and the Xiaomi 14 and 13 series in December, with dates "subject to change". Xiaomi had not published new eSIM menu names for HyperOS 4 on the support pages we read on 9 November. If your screens differ, type eSIM in the search bar at the top of Settings.

How do you install a travel eSIM on HyperOS?

Open Settings › Mobile networks, switch on Turn on eSIM, tap OK in the pop-up, tap Add eSIM and scan the provider's QR code; the profile downloads in a minute or two and appears as a second line. These are the steps of Xiaomi's "How to add eSIM on the Xiaomi 14T?" page, and Vodafone Ireland's Xiaomi 17 guide shows the same screens.

With the QR code

  1. Open Settings and tap Mobile networks.
  2. Switch on Turn on eSIM. A pop-up asks you to confirm: tap OK.
  3. Tap Add eSIM. The camera opens inside the settings screen.
  4. Scan the QR code. The phone shows the plan and downloads it; follow the on-screen prompts until the new line is listed under Mobile networks.
  5. Give the line a clear name such as "Travel" so you can tell the two SIMs apart later.
  6. Leave your home SIM as the Data SIM for now. The travel eSIM cannot connect at home anyway, and the partner plans we checked only start at the first connection in the destination country.

Without a QR code, or from an app

Most eSIM providers also send an SM-DP+ address and an activation code. On the Add eSIM screen, choose the option to enter the details yourself instead of scanning, and paste the two values from the email. On the Xiaomi 15, Xiaomi's Xiaomi 15 eSIM page places the choices one level deeper: Turn on eSIM, then Manage SIM, then Add eSIM, Discover eSIMs or Transfer eSIM from another device. Provider apps that install the eSIM for you end on the same system screen and ask for the same confirmation.

  • QR code: fastest, nothing to type; but you need a second screen or a printout.
  • Manual code: works from the email on the same phone; but one wrong character makes the download fail, so copy and paste.

Which layout does your phone show?

What you seePath to add the eSIMXiaomi source
HyperOS 3 (Xiaomi 14T, 17 series and others)Settings › Mobile networks › Turn on eSIM › OK › Add eSIMXiaomi 14T page, Vodafone Ireland Xiaomi 17 guide
Phones with two eSIM slots (Xiaomi 15)Settings › Mobile networks › Turn on eSIM › Manage SIM › Add eSIMXiaomi 15 page
Older layoutSettings › SIM cards & mobile networks › Use eSIM › OK › Manage eSIM › Add mobile planXiaomi article without OS version

If the download stops with an error, do not scan the same code again and again. Many travel QR codes work only once (the shop in our worked example says so in its FAQ): check first whether the line already appears under Mobile networks, then ask the provider to reissue the profile.

How should you set up dual SIM for the trip?

Make the travel eSIM the Data SIM, allow data roaming so it can use the local network, and keep your home SIM switched on as Default for calls, so calls and SMS codes still reach your usual number. All three settings sit on the HyperOS 3 Mobile networks screen, according to Vodafone Ireland's Xiaomi 17 dual SIM guide and data roaming guide.

Data SIM is the HyperOS setting that decides which line carries mobile internet when two SIMs are active. Only one line carries data at a time; the other stays on standby for calls and texts. Switching it to the travel eSIM is what moves your apps onto the cheap local data, and switching it back is the first thing to do when you come home.

Setting (Settings › Mobile networks)Travel eSIMHome SIM
Line switched on (tap the line › Turn on)OnOn, for calls and bank SMS
Data SIMSelectedNot selected
Default for callsNoYes
Data roaming › International roamingAllowed (the eSIM is a foreign line on a local network)Not used, as long as it is not the Data SIM

Why roaming must be on for a travel eSIM

A travel eSIM is technically a foreign line roaming on a local network: its SIM belongs to a provider outside the country, so the local operator treats it as a visitor. With roaming blocked, the line shows signal bars but no internet, and the provider's set-up instructions almost always list data roaming as a requirement. On the Xiaomi 17 guide, Data roaming opens a drop-down next to International roaming; pick the setting that allows it abroad.

Protecting your home line from roaming charges

On the Xiaomi 17 screens, Data roaming sits on the main Mobile networks page rather than inside each SIM, so the protection for your home line comes from the Data SIM choice: a line that is not the Data SIM does not carry mobile data. If your phone offers an option to switch mobile data between SIMs automatically, leave it off. If you do not need SMS codes during the trip, the strictest option is to switch the home line off entirely (tap it, then Turn on). Calls you receive on the home number can still be billed by your home operator; our guide to keeping WhatsApp and your home number on a travel eSIM covers those costs and Wi-Fi Calling.

Do you need to set an APN on a Xiaomi?

Usually not: you only add an APN by hand when the travel line shows signal bars but no internet, and only with the value from your provider's email. Providers state in their set-up instructions whether one is needed; the shop in our worked example says it is normally automatic. The APN (access point name) is the address the phone uses to reach the operator's data network; a missing or wrong one is the classic cause of "connected, but nothing loads".

If you need it, Vodafone Ireland's Xiaomi 17 internet set-up guide gives the HyperOS 3 path: Settings › Mobile networks › tap the name of the SIM › Access point names › New APN. Type a name and the APN value from your provider's email, add any other field the email lists, then open More › Save and select the new entry. Make sure you are inside the travel eSIM's page, not the home SIM's, or you will break your home data instead.

Two more settings live on the same per-SIM page and help in rural areas. Preferred network type lets you force 4G if 5G is patchy, and Select carrier lets you switch off Automatically select network and pick the operator your plan names, as Vodafone Ireland's network selection guide shows.

HyperOS pitfalls: SIM 2, eSIM slots and deleted profiles

Xiaomi's own help pages document four behaviours that surprise travellers. None is a fault; each changes how you should set the phone up.

The eSIM can take the place of SIM 2

On many models the eSIM shares the second SIM position. Xiaomi's eSIM capacity page says the eSIM "is generally supported in the second card slot", and its older article warns that "eSIM card and SIM 2 cannot be used at the same time". If you carry two physical SIMs, the travel eSIM switches one of them off: keep your main number in slot 1. The same page names the Xiaomi 15, 15 Ultra, 14T and 14T Pro as models that accept an eSIM in either slot.

Several profiles, one active per slot

Each slot stores up to five eSIMs but only one can be active at a time, says the same page, and the Xiaomi 15 page gives a total of 10 profiles with dual eSIM support. So you can keep last year's Egypt eSIM installed and add a Morocco one, but switching between them means disabling one first. Our article on how many eSIMs an Android phone stores compares brands.

Delete means gone

Xiaomi's disable and delete page is blunt: after Delete mobile plan, the eSIM "will not be restored and displayed in the eSIM list", and you must disable a plan before deleting it. Deleting does not cancel what you paid for, but most travel QR codes cannot be scanned twice, so never delete a travel eSIM to "start again" while you are abroad.

Your phone's region matters

Chinese and some Indian or Japanese versions lack eSIM even when the global model has it. A phone bought on a marketplace can look identical to a European one; the missing EID gives it away.

What if Turn on eSIM or Add eSIM is missing?

A missing eSIM switch on a Xiaomi almost always means the exact version you own has no eSIM chip, and no setting or update can add one. Before concluding that, search Settings for "eSIM", because older layouts hide it under SIM cards & mobile networks › Use eSIM. Our guide to the missing Add eSIM option on Android walks through the full five-minute diagnosis: regional variant, carrier lock, work-profile policy.

For a Xiaomi, check these in order. Is the model on Xiaomi's eSIM list above? Does the phone show an EID? Was it sold in China, India or Japan? If all three point to no eSIM, your options for the trip are a physical local SIM bought on arrival or a physical travel SIM; the country hubs for Egypt and Tunisia compare those options with prices.

What to do when the travel eSIM does not connect

Work down this table on arrival. Each fix uses a HyperOS 3 setting named above; if none works, write to the provider's support with the error and your EID.

What you seeLikely causeWhat to do
No signal on the travel lineLine switched off, or roaming not allowedMobile networks › tap the line › Turn on; Data roaming › International roaming › allow
Signal bars, no internetHome SIM still the Data SIM, or APN missingMobile networks › Data SIM › travel eSIM; then add the provider's APN
"No service" outside citiesPhone holding on to a network your plan does not useTap the line › Select carrier › Automatically select network off › choose the plan's operator
Slow or unstable 5GPatchy 5G coverageTap the line › Preferred network type › 4G
Download fails during installWeak Wi-Fi, or code already usedCheck whether the line exists; retry on better Wi-Fi; ask for a new profile, do not rescan the same code
Your second physical SIM stopped workingeSIM uses the SIM 2 positionExpected on many models: keep the main SIM in slot 1

Restarting the phone after any change helps the modem re-register. The wider list of ten fixes for a travel eSIM that fails abroad covers rarer cases, and the Samsung version of this guide is in our Galaxy travel eSIM set-up if someone in your group uses one.

Worked example: a Morocco eSIM on a Redmi Note 15 Pro

Here is the whole sequence for a Redmi Note 15 Pro 5G, which is on Xiaomi's eSIM list, on a 7-day trip to Marrakech. For this example the eSIM we recommend is eSIM Maroc, a partner of this site: on 9 November 2026 its 7-day plan cost €24, with 1 GB a day at full 4G/5G speed, then 512 kbps until the daily reset, and hotspot included. Its FAQ adds three points that matter on a Xiaomi: data roaming must be on for the eSIM line, the APN is normally automatic, and the QR code can be scanned only once, on one device.

  1. Two days before: buy the plan, open the QR email on a laptop, and on home Wi-Fi go to Settings › Mobile networks › Turn on eSIM › OK › Add eSIM. Scan, name the line "Maroc", and leave the home SIM as Data SIM.
  2. At the gate: nothing to do. The plan only starts at the first connection to a Moroccan network, according to the shop.
  3. On landing at Marrakech Menara: Settings › Mobile networks › Data SIM › Maroc; Data roaming › International roaming › allow. Keep Default for calls on the home SIM.
  4. If bars appear but nothing loads: check Data SIM first, then the APN in the shop's email.
  5. Back home: set Data SIM back to the home SIM and disable the Maroc line; delete it only once the plan has ended.

The same sequence works for Egypt and Tunisia with that country's plan. The country hubs for Egypt eSIM options and Tunisia eSIM options list the networks and prices, and our Morocco eSIM install guide covers the Moroccan networks your phone will show.

How we checked

On 9 November 2026 we read Xiaomi's eSIM device list and its eSIM help pages in English, French, German and Spanish (Xiaomi 14T and Xiaomi 15 pages, the eSIM capacity page, the disable and delete page and the older SIM cards & mobile networks article), Xiaomi's HyperOS page with the HyperOS 4 schedule, Vodafone Ireland's Xiaomi 17 (Android 16) device guides for eSIM, dual SIM, data roaming, APN and network selection, Notebookcheck's Xiaomi 17 review, and eSIM Maroc's shop and FAQ pages. No order was placed and no phone was tested by us: menu names are those the vendor and the carrier guides publish.

What we could not verify: Xiaomi publishes no HyperOS 4 eSIM steps yet, and no official French, German or Spanish page gives the labels of the Data SIM, data roaming and APN sub-menus, so we describe them. Xiaomi's list does not show the POCO X8 Pro Max or the Leica Leitzphone; our model list explains where those entries come from.

Next step: check your exact model in our eSIM phone checker or on the Xiaomi page, then, for Morocco, install eSIM Maroc at home on Wi-Fi.

Frequently Asked Questions

Where is the eSIM setting on Xiaomi HyperOS?expand_more
On HyperOS 3 it is Settings, Mobile networks, Turn on eSIM, then Add eSIM. Older software shows SIM cards & mobile networks, Use eSIM, Manage eSIM, Add mobile plan.
Does Redmi Note 13 support eSIM?expand_more
Only the Redmi Note 13 Pro 5G and Note 13 Pro+ 5G are on Xiaomi's eSIM list; the plain Redmi Note 13 is not. Check your regional version, as some Indian versions differ.
Why did my second SIM stop working after adding an eSIM on Xiaomi?expand_more
On many Xiaomi models the eSIM uses the SIM 2 position, so Xiaomi says the eSIM and SIM 2 cannot be used at the same time. Keep your main SIM in slot 1.
Do I need to turn on data roaming for a travel eSIM on Xiaomi?expand_more
Yes. A travel eSIM roams on a local network, so it gets no internet with roaming blocked. Your home SIM does not use data abroad as long as it is not the Data SIM.
Can I reinstall a deleted travel eSIM on my Xiaomi?expand_more
Usually not with the same QR code, because most codes can only be scanned once and Xiaomi says a deleted eSIM is not restored. Ask the provider for a new profile.

Check your own phone in seconds

The free eSIM Check app reads your device's real hardware capabilities — no guesswork.

On iPhone or a computer? Search any model with our eSIM checker.

Get it on Google Play

Related articles